Adhesion of tooth fragment after trauma: effect of adhesion strategy and storage in the rescue box.

This study aims to investigate the impact of storage conditions for crown fragments (specifically, whether they were stored within a tooth rescue box or in tap water) on their adhesion to fractured teeth when subjected to two different adhesive systems (namely, total etch and self etch). Sixty maxillary premolars were sectioned to obtain tooth fragments. These fragments were stored briefly (2 hours) and reattached in the following groups: Group 1 (fragments stored in tooth rescue box and reattached with etch and rinse (E&R) technique), Group 2 (fragments stored in tap water and reattached with E&R technique), Group 3 (fragments stored in tooth rescue box and reattached with self-etch (SE) technique), and Group 4 (fragments stored in tap water and reattached SE technique). After reattachment, the bonded tooth fragments underwent thermal cycling (500 cycles, 5-55 °C) and bond strength testing using a universal testing machine. Two-way Analysis of Variance (ANOVA) and Tukey's tests were used for bond strength comparison (p ≤ 0.05). A two-parameter Weibull distribution was conducted to evaluate the reliability of the storage medium and adhesion modality on bond strength. The results showed that measured shear bond values (MPa ± Standard deviation (SD); arranged in descending order) for each group were: Group 2 (Tap water/E&R = 6.5 ± 2.1), Group 1 (Rescue box/E&R = 6.0 ± 2.5), Group 4 (Tap water/E&R = 5.1 ± 2.8), and Group 3 (Rescue box/SE = 3.6 ± 3.2). Significant differences were found only between Groups 2 and 3 (p = 0.002). In conclusion, storing crown fragments in a tooth rescue box did not significantly affect the shear bond strength of the restored tooth. However, fragments reattached using the self-etch technique showed comparable shear bond strength but a higher rate of adhesive failures compared to the E&R technique.

Cleaning performance of electric toothbrushes around brackets applying different brushing forces: an in-vitro study.

Throughout treatment with fixed orthodontic appliances, effective plaque control is crucial to maintaining dental health. This in-vitro study evaluated the cleaning performance of eleven different brush heads of seven electric toothbrushes (oscillating-rotating and sonic motions) and varying brushing forces around orthodontic brackets. Six Mini Diamond® Twin brackets were placed on black-stained front teeth. Teeth were coated with white titanium oxide and brushed in a machine six times for one minute with two different brushing forces (1 N and 1.5 N). Eleven different brush heads were evaluated (either oscillating-rotating or sonic movements). The teeth were scanned and planimetrically evaluated after brushing. Three detailed plaque areas (DPAs) were created: proximal (< 1 mm to bracket), mid-tier (1-2 mm to bracket), and distant (> 2 mm to bracket). The proportion of contaminated proximal, mid-tier, and distant surfaces (white regions) in relation to the respective DPA was calculated. Independent of brushing forces, places with a higher distance (> 2 mm) to the orthodontic bracket had the least amount of residual contamination, followed by areas with a minor (1-2 mm) and proximal distance (< 1 mm). In all of the brushes tested and for both estimated brushing forces, the region with the highest residual contamination was the proximal area. The brush heads of the Paro® Sonic toothbrush left the least amount of residual contamination. The cleaning performance of electric toothbrushes around brackets on upper incisors varied across the brushes examined. The proximal area has the most residual contamination. Furthermore, 9 out of 11 toothbrushes cleaned more successfully with 1.5 N than with 1 N brushing force.

Initial bacterial adherence and biofilm formation on novel restorative materials used in paediatric dentistry.

OBJECTIVE: To evaluate the initial bacterial adherence and biofilm formation on novel restorative materials in paediatric dentistry and compare the results to stainless steel crown and primary enamel. MATERIALS AND METHODS: Twenty-five samples (Diameter = 4 mm) from five restorative materials (Tetric Power Fill light cured for 3 s or 10 s, Fuji II LC, Equia Forte HT Fil, Cention Forte, Stainless-steel crown) and primary enamel were prepared. Four samples served for recording of surface roughness (Ra) using a contact profilometer, 21 samples were incubated in stimulated human saliva for 2 h (initial bacterial adherence) and 72 h (biofilm formation) and served to determine ion releasing and bacterial growth. After 2 and 72 h, the number of colony-forming units (CFU) per ml was counted and expressed in Log10 CFU/ml. Data were analysed with two-way ANOVA and Tuckey's multiple comparisons test (p < 0.05). RESULTS: All tested materials showed similar initial bacterial adherence (p > 0.1). Stainless steel crown showed statistically significantly less biofilm formation than all other tested materials (p ≤ 0.02), except for Fuji II LC (p = 0.06). In terms of biofilm formation, the differences between all tested materials were not statistically significant (p ≥ 0.9). SIGNIFICANCE: Novel restorative materials in paediatric dentistry show similar initial bacterial adherence and biofilm formation. However, compared to other restorative materials, stainless steel crowns demonstrate the lowest level of biofilm formation. Ion-releasing materials may not necessarily show better antimicrobial properties than conventional materials.

Supplementation of Energy Drinks with Green Tea Extract: Effect on In Vitro Abrasive/Erosive Dentin Wear.

PURPOSE: To investigate the effect of the supplementation of energy drinks with green tea extract on abrasive and erosive dentin wear. MATERIALS AND METHODS: Six groups, each comprising 15 bovine dentin samples, were prepared, yielding a total of 90 samples. Erosion was performed by immersing the samples in Red Bull and Red Bull light with and without green tea extract. Tap water with and without green tea extract was used as the control groups. The samples were subjected to abrasive/erosive cycling for five days. The following cycling was performed daily: toothbrush abrasion (20 brushstrokes; 2.5 N); eight erosive cycles (2 min storage in the respective solutions); in between the erosive cycles, storage in artificial saliva (60 min) and again toothbrush abrasion (20 brushstrokes; 2.5 N). During the night, samples were again stored in artificial saliva. Abrasive/erosive dentin wear was measured using a stylus profilometer (µm, accuracy = 40 nm). The measured dentin loss results from the vertical position shift on the y-axis from base to final profile after the wear process in 2D. Pairwise comparisons between the groups were carried out using Wilcoxon signed-rank test. RESULTS: The following dentin wear (median [IQR]) was measured: Red Bull: 1.9 µm (0.5); Red Bull Light: 1.3 µm (0.3); Red Bull with green tea extract: 0.8 µm (0.3); Red Bull Light with green tea extract: 0.3 µm (0.5); Tap water with green tea extract: -0.2 µm (0.7); Tap water: -1.0 µm (1.2). The comparison of all tested groups to each other proved to be statistically significant (p < 0.05). CONCLUSION: The supplementation of energy drinks with green tea extract provide a protective effect against erosive/abrasive wear in vitro.

A laboratory pilot study on voids in flowable bulk-fill composite restorations in bovine Class-II and endodontic access cavities after sonic vibration.

This pilot study investigated whether sonic-powered application of a bulk-fill resin-based composite (RBC) in Class-II or endodontic access cavities reduces void formation. The crowns and roots of 60 bovine teeth with Class-II cavities (C) and endodontic access cavities (E) respectively, were assigned to ten groups (C1-C5, E1-E5). Cavities were filled with RBC (SDR flow + , one increment) using different application techniques: no adaptation (C1 + E1), spreading of RBC on the cavity surfaces with a dental explorer tip (C2 + E2), low (C3 + E3) or high frequency (C4 + E4) direct activation by inserting a sonic-powered tip into RBC and high frequency indirect activation with an ultrasonic insertion tip (C5 + E5). The restorations were light-cured and investigated for voids using microtomography. The number of voids and percentage of voids related to the volume were statistically analysed (α < 0.05). While most voids in Class-II restorations were observed in C4 (p ≤ 0.0031), no significant differences were found between the other groups (p > 0.05). The percentage of voids showed no differences in E1-E5 (p > 0.05). C4 showed a significantly higher percentage of voids compared to C2 (p < 0.001). There is no benefit in applying sonic vibration when filling Class-II or endodontic access cavities.

A 3-year Retrospective Analysis of Dento-Alveolar Injuries at the University Children's Hospital Zurich (2018-2020).

Children and adolescents are vulnerable to dental trauma due to their active lifestyles, lack of coordination, and inexperience in recognizing potentially dangerous situations. Early recognition and proper management of dental trauma is crucial in order to minimize the risk of complications and ensure optimal outcomes. The aim of this study was to perform a retrospective analysis of all dento-alveolar injuries in children and adolescents who were treated at the University Children's Hospital Zurich from 2018-2020 by the resident physicians of the Centre of Dental Medicine of the University of Zurich. All information concerning age and sex distribution, seasonal and weekly variations, as well as aetiology, types of trauma and co-affected structures in the head and neck area from 389 patients was analysed. For data extraction, a parameterised Excel list was created, enabling a continuous data collection. In the study, 65% of the patients were male and 35% female. The average patient age was 7 years and 4 months. The highest frequency of trauma occurred in mixed dentition (49%), followed by deciduous dentition (36%) and permanent dentition (15%). Most of the accidents occurred in the second quarter of the year, especially in the month of May slightly more injuries were reported. The most common injuries were increased tooth mobility (40%) and tooth fractures without pulp exposure (34%). Less frequent were tooth fractures with pulp exposure (12%), lateral dislocations (29%), avulsions (21%), intrusions (8%), extrusions (6%) and root fractures (4%). As in many studies the upper central incisors were most often affected. Main causes of dental trauma were falls, especially by bike (18%) or scooter (14%). Soft tissue injuries or fractures, in the area of the head and neck occurred in 59% and 10% of the cases simultaneously accompanied by dento-alveolar trauma.

Influence of high-irradiance light curing on the marginal integrity of composite restorations in primary teeth.

BACKGROUND: Reducing the necessary time to restore primary teeth improves the cooperation of paediatric patients. This study aimed to investigate the marginal integrity of restorations prepared with a bulk-fill resin-based composite (RBC) containing additional fragmentation chain transfer (AFCT) compared to a conventional RBC when light cured with a rapid high-irradiance (3 s) and a regular (10 s) curing mode. METHODS: Forty class-II cavities were prepared in 40 primary molars. The molars were randomly divided into four groups based on the applied light-curing modes (regular: 10 s @ 1200 mW/cm2 or high-irradiance: 3 s @ 3000 mW/cm2) and the used restorative material (AFCT-containing bulk-fill RBC "Power Fill" or AFCT-free conventional RBC "Prime"). After thermo-mechanical loading, the marginal integrity was analysed using scanning electron microscopy. A beta regression model and pairwise comparisons were used to statistically analyse the data. RESULTS: The mean marginal integrity (% ± SD) of the restorations for each group was as follows: Power Fill (10 s: 79.7 ± 15.6) (3 s: 77.6 ± 11.3), Prime (10 s: 69.7 ± 11.1) (3 s: 75.0 ± 9.7). The difference between the RBCs for the same light-curing mode was statistically significant (p ≤ 0.05). The difference between the light-curing modes for the same RBC was not statistically significant (p ˃ 0.5). CONCLUSIONS: AFCT-containing bulk-fill RBC "Power Fill" achieves similar marginal integrity when light-cured with either high-irradiance or regular light-curing modes. "Power Fill" achieves better marginal integrity than the conventional RBC "Prime" regardless of the applied light-curing mode.

Marginal Integrity of Simplified Adhesive Strategies in Primary Teeth.

OBJECTIVE: The aim of this research was to investigate the effect of simplified adhesive strategies (self-etch vs selective enamel etch and 10- vs 20-second adhesive application time) on the marginal integrity in primary molars. METHODS: Forty deep class-II cavities were prepared in 40 extracted primary molars. The molars were divided into 4 groups based on the applied universal adhesive strategy as follows: groups 1 and 2: selective enamel etch with 20- or 10-second application time and groups 3 and 4: self-etch with 20- or 10-second application time. All cavities were restored with a sculptable bulk-fill composite restoration. The restorations underwent a thermomechanical loading (TML, 5-50 °C, 2-minute dwelling time, ×1000; 400,000 loading cycles, 1.7 Hz, 49 N). Marginal analysis before and after TML was conducted with scanning electron microscopy and the marginal integrity of each restoration was calculated as a percentage of continuous margins. A beta regression model was adopted to statistically analyse the data with a consequent pairwise comparison. RESULTS: The mean marginal integrity (% ± SD) of the restorations for each tested adhesive strategy after TML was as follows: selective enamel etch/20 seconds = 85.4 ± 3.9, self-etch/20 seconds = 85.3 ± 5.2, self-etch/10 seconds = 80.1 ± 8.2, and selective enamel etch/10 seconds = 80.0 ± 8.5. The difference between both adhesive strategies was not statistically significant at the same application time. The difference between both application times within the same adhesive strategy was statistically significant (P ≤ .01). CONCLUSIONS: Universal adhesives applied either in selective enamel etch or in self-etch mode result in comparable marginal integrities when restoring class-II cavities in primary molars. Shortened adhesive application time (10 seconds) could lead to a reduction in the marginal integrity in comparison to the recommended application time of 20 seconds.

Effect of Toothbrush Bristle Stiffness and Brushing Force on Cleaning Efficacy.

PURPOSE: This study investigated the effect of toothbrush bristle stiffness and brushing force on the cleaning efficacy in vitro. MATERIALS AND METHODS: Eighty bovine dentin samples were allocated to eight groups (n=10). Two custom-made toothbrushes of different bristle stiffness (soft and medium) were tested at four different brushing forces (1, 2, 3 and 4 N). Dentin samples were stained in black tea and brushed (60 strokes/min) for a total of 25 min in a brushing machine with an abrasive solution (RDA 67). Photographs were taken after 2 and 25 min of brushing time. Cleaning efficacy was measured planimetrically. RESULTS: After 2 min of brushing, the soft-bristle toothbrush did not cause statistically significantly different cleaning efficacy at different brushing forces, while the medium-bristle toothbrush cleaned statistically significantly less efficaceously only at 1 N. Comparing the two different toothbrushes, higher cleaning efficacy was observed only at 1 N for the soft-bristle brush. At 25 min brushing time, the soft-bristle cleaned statistically significantly better at 4 N compared to 1 N and 2 N and at 3 N compared to 1 N. Using the medium-bristle, cleaning efficacy increased with increasing brushing force. After 25 min of brushing, no statistically significant difference was observed between the two different toothbrushes. CONCLUSION: Irrespective the brushing force, the use of a soft or medium toothbrush results in comparable cleaning efficacy. At 2 min brushing time, increasing the brushing force does not increase the cleaning efficacy.

Abrasive Enamel and Dentin Wear Resulting from Brushing with Toothpastes with Highly Discrepant Relative Enamel Abrasivity (REA) and Relative Dentin Abrasivity (RDA) Values.

PURPOSE: To investigate the absolute wear caused by toothpastes with highly discrepant REA (Relative Enamel Abrasivity) and RDA (Relative Dentin Abrasivity) values on both enamel and dentin: Candida Peppermint (CP; REA: 1; RDA: 42), Colgate Total Original (CTO; REA: 4; RDA: 100), Signal White System (SWS; REA: 8; RDA: 143), and Candida White Diamond (CWD; REA 244; RDA: 12). MATERIALS AND METHODS: Eighty (80) bovine enamel samples and 80 dentin samples were divided into four groups each (n = 20) and investigated after a 6-h brushing procedure (21,600 cycles, 60 cycles/min, load of 2.5 N) with the four toothpastes. The abrasive enamel and dentin wear were registered using a contact profilometer. The median and interquartile range (IQR) of the abrasive enamel and dentin wear were calculated for each group. Pairwise comparisons were conducted using the Wilcoxon signed-rank exact test, and the p-value was adjusted according to Holm (statistical significance set at 0.05). RESULTS: CWD led to the highest abrasive enamel wear (9.86 µm [5.77]). CTO caused the highest abrasive dentin wear (166.70 µm [69.90]), being statistically significantly higher than the wear for CP (54.20 µm [24.00]) and CWD (17.00 µm [7.80]) (p = 0.00001). The abrasive dentin wear for CWD was statistically significantly lower in comparison to all other groups (p = 0.00001). CONCLUSION: Toothpastes with highly discrepant REA and RDA values presented statistically significantly different absolute wear on enamel and dentin. REA and RDA values should both be declared for every toothpaste.

Molar-incisor hypomineralisation: Knowledge and perception of Syrian undergraduate and postgraduate dental students.

INTRODUCTION: Dentists' knowledge and expertise, especially in their early career, are primarily shaped during undergraduate studies. This cross-sectional study aimed to assess the knowledge and perception of Syrian under- and postgraduate students regarding diagnosing and managing molar-incisor hypomineralisation (MIH)-affected teeth. MATERIALS AND METHODS: Final-year dental students (FY-students), postgraduates in paediatric dentistry (PD-postgraduates) and postgraduates in other lines of specialty (OS-postgraduates) in all Syrian dental schools were invited to participate in an established web-based survey covering the knowledge and attitudes regarding the prevalence, aetiology, diagnosis and management of MIH. Data were analysed with descriptive statistics and Fisher's exact/chi-squared tests at 5%. RESULTS: In total, 1142 post- and undergraduate students from six public and five private dental schools in Syria participated in this study (867 FY-students, 74 PD-postgraduates and 201 OS-postgraduates). PD-postgraduates were found to present statistically significantly better knowledge regarding MIH compared with the two other groups. Only 19% of FY-students and 54% of OS-postgraduates reported themselves familiar with MIH (compared with 97% of PD-postgraduates). Similarly, 18% of FY-students and 27% of OS-postgraduates were capable of diagnosing MIH (compared with 81% of PD-postgraduates). Stainless-steel crowns and direct composite fillings were chosen as most suitable for treating MIH-affected molars from all responders. CONCLUSIONS: FY-students and even OS-postgraduates in Syria lack knowledge and confidence when confronted with MIH. The university curricula need to include more educational materials to equip the students with the necessary tools to manage MIH clinically.

Relative dentin and enamel abrasivity of charcoal toothpastes.

OBJECTIVES: Very little data are known about charcoal toothpastes. The aim of this study was to counteract the missing data by determining the relative dentin abrasivity (RDA) and relative enamel abrasivity (REA) values of charcoal toothpastes. METHODS: Radioactively charged dentin and enamel samples were randomly divided into groups of eight specimens. Each group was brushed with two of total 12 charcoal toothpaste slurries and with a standard abrasive with a known RDA and REA value. The measured radioactivity in counts per minute within the slurries corresponds to the amount of dentin or enamel abraded. RDA and REA values of the charcoal toothpastes were expressed relative to the known value of the standard slurry. RESULTS: The RDA and REA values of the charcoal toothpastes have a broad range of 24-166 and 0-14, respectively. CONCLUSIONS: The RDA and REA values do not differ significantly from previously tested commercially available toothpastes. However, the lack of fluoride compounds in many of the investigated charcoal toothpastes can have a less beneficial effect for the consumers. It is very important to educate patients accordingly.

Effect of brushing force on the abrasive dentin wear using slurries with different abrasivity values.

OBJECTIVE: The aim of this study was to investigate the resulting abrasive dentin wear using abrasive slurries with different RDA values and applying increasing brushing forces. METHODS: Forty-five bovine incisors were randomly allocated in three groups (A, B, C, n = 15). One hundred and eighty dentin samples were prepared from these incisors and allocated to twelve groups (A1-A4, B1-B4, C1-C4; n = 15). The groups were subjected to a brushing cycle (120 strokes/min, 25 min) as follows: groups A1 to A4 with an abrasive slurry (RDA = 71) applying increasing brushing forces (1, 2, 3 and 4 N). Groups B1 to B4 were brushed using an abrasive slurry (RDA = 85) and C1 to C4 (RDA = 133) applying the same above-mentioned brushing forces. Abrasive dentin wear was recorded using a stylus profilometer and compared amongst the groups using robust models. Pairwise comparisons in each model were tested and corrected after Tukey's method (α = 0.05). RESULTS: Applying 1-N brushing force resulted in the same amount of abrasive dentin wear in all groups regardless of the abrasivity of the used slurry. Increasing the brushing force to 2 N resulted in statistically significantly higher abrasive wear in all groups. This increase in abrasive wear was much higher when the slurry with high abrasivity was used (RDA = 133) compared with the lower abrasive slurry (RDA = 71). CONCLUSION: The abrasivity of the used slurry does not add to the resulting abrasive wear when the brushing force is kept at 1 N. It seems better to advise and help the patients (showing signs of non-carious cervical lesions) calibrating their brushing force to 1 N, than only to advise them to use toothpastes with lower abrasivities.

Knowledge, perceptions, attitudes, and clinical experiences on molar incisor hypomineralization among Syrian pediatric dentists and general dental practitioners: a cross-sectional study.

BACKGROUND: Molar incisor hypomineralization (MIH) is a widespread oral health problem. Dentists encounter several challenges regarding MIH management worldwide. The aim of this study was to evaluate and compare the knowledge, perceptions, attitudes, and clinical experiences on MIH among general dental practitioners and pediatric dentists in Syria. METHODS: All general dental practitioners and pediatric dentists belonging to the Syrian Dental Syndicate of Damascus were invited to complete a cross-sectional structured questionnaire (n = 1936). The questionnaire consisted of four sections and required responses regarding demographic data, knowledge, perceptions, attitudes, and experiences on MIH. Data were analyzed with Pearson's chi-square test and multivariate regression models using SPSS Ver. 23.0. RESULTS: The overall response rate was 36.31% (703/1936). Pediatric dentists were significantly more familiar with MIH (p < 0.001) and more confident when diagnosing it (p < 0.001). Most participants (43.95%) perceived an increase in MIH prevalence in Syria. Stainless steel crowns were the most favorable restorative material for molars with post-eruptive breakdown (51.38%). As for molars and incisors with opacities, composite resin was preferred with (41.82%), and (67.51%) respectively. General dental practitioners requested further training regarding MIH treatment (p < 0.001). CONCLUSIONS: Pediatric dentists were equipped with further knowledge regarding MIH, and were more confident when diagnosing it. There is a need for additional training and education for general dental practitioners. Most respondents perceived an increase in the prevalence of MIH. There is a dearth of data regarding MIH prevalence in Syria. The materials of choice for restoring teeth with MIH were stainless steel crowns and composite resin.

Interplay Between the In-Vitro Cleaning Performance and Wear of Manual Toothbrushes.

PURPOSE: This in-vitro study deals with the question of whether the wear and tear of the manual toothbrush over a simulated timeframe up to 24 months has an effect on its cleaning performance. The purpose was to find indications as to whether and when a toothbrush needs to be replaced based on its cleaning performance. MATERIALS AND METHODS: Models equipped with artificial teeth (coated with titanium dioxide) were brushed in-vitro using a brushing machine with clamped manual toothbrushes. The machine carried out even, horizontal brush strokes (120 brush strokes/min) for 1 min with a constant contact pressure of 2.5 N. The percentage of the area of titanium dioxide removed from the buccal, mesial and distal surfaces of the artificial teeth corresponded to the cleaning performance. The manual toothbrushes were used on bovine roots to simulate the wear and tear after 2, 4, 6, 12, 18, 24 months of use. The cleaning performance was re-evaluated after each simulated timepoint of wear. In addition, the brushes were photographed after each cycle. RESULTS: An increase in the in-vitro cleaning performance of the toothbrush was observed up to 6 months of wear compared to the starting point. After that, the cleaning performance decreased somewhat, but always remained above the initial cleaning performance. CONCLUSION: Based on the in-vitro cleaning performance after 24 months, the toothbrush would not have to be replaced. However, this in-vitro study cannot determine when a toothbrush should be replaced, because in-vivo it is also dependent on a variety of other factors such as fraying and microbial colonisation. Direct transfer of results from this study to everyday clinical practice is therefore difficult.

Marginal integrity of classical and bulk-fill composite restorations in permanent and primary molars.

Bulk-fill composites enable timesaving and less technical-sensitive application of restorations. This study investigated and compared the marginal integrity of classical and bulk-fill composite restorations in primary and permanent molars before and after thermo-mechanical loading (TML). Two Class II cavities were prepared in each of 20 primary and 20 permanent molars. The molars were randomised in four groups for each molar type. Groups 1 and 5 were restored with a high-viscous bulk-fill composite (Tetric PowerFill), groups 2 and 6 were restored with a flowable bulk-fill composite (Tetric PowerFlow), groups 3 and 7 were restored with a high-viscous classical composite (Tetric Prime), and groups 4 and 8 were restored with a flowable classical composite (Tetric EvoFlow). In permanent molars, the flowable composites were covered with a 2-mm layer of high-viscous composite (groups 6 and 8). The restorations were subjected to TML in a custom-made chewing machine (5-50 °C, 2 min dwelling time, × 1000; 400 ,000 loading cycles, 1.7 Hz, 49 N), and quantitative marginal analysis was conducted using scanning electron microscopy. Marginal integrity of each restoration was calculated as a percentage of continuous margins before and after TML. The tested high-viscous bulk-fill restoration showed similarly high marginal integrity in primary and permanent molars as the classical restoration. The tested flowable bulk-fill restoration showed the lowest marginal integrity compared to all other restorations after TML. In contrast to flowable bulk-fill restorations, high-viscous bulk-fill restorations show similar marginal integrity as classical hybrid composite restorations after TML, in both primary and permanent molars.

Diamond particles in toothpastes: in-vitro effect on the abrasive enamel wear.

BACKGROUND: Diamond particles have recently been used as abrasives in toothpastes, which raises questions about its abrasive behaviour towards enamel. This study was carried out to investigate the abrasive enamel wear caused by three diamond-loaded toothpastes (Candida White Diamond: CWD, Swiss Smile Diamond Glow: SSDG, Emoform F Diamond: EFD) and to compare it with a traditional toothpaste with silica abrasive (Colgate Total Original CTO). METHODS: Eighty bovine enamel samples were divided into four groups (n = 20) and brushed for 21,600 cycles (60 cycles/min) for 6 h at 2.5-N brushing force. The abrasive enamel wear was recorded with a contact profilometer. The median and interquartile range (IQR) of the abrasive enamel wear was calculated in each group. Pairwise comparisons were conducted using Wilcoxon signed rank exact test and the p value was adjusted according to Holm. Significance level was set at 0.05. RESULTS: Diamond-loaded toothpastes caused statistically significantly higher abrasive wear than the traditional toothpaste (p < 0.0001). SSDG caused statistically significantly higher enamel wear (19.0 µm (11.2)) than CWD (8.4 µm (4.6)) and EFD (7.3 µm (3.9)) (p < 0.0001). CONCLUSIONS: Diamond-loaded toothpastes cause higher enamel wear than toothpastes with traditional abrasives and also exhibit different abrasivity behaviour compared to each other.

Effect of tapered-end and round-end bristles on the abrasive dentine wear applying increasing brushing forces.

OBJECTIVE: To investigate the effect of toothbrush bristles end configuration on the abrasive dentine wear at different brushing forces. MATERIAL AND METHODS: One hundred and sixty bovine dentine samples were randomized into eight groups (n = 20). Groups (1 to 4) were brushed with tapered-end bristles at 1-, 2-, 3-, and 4-N brushing forces, respectively. Groups (5 to 8) were brushed with round-end bristles with the same brushing forces. The brushing sequence was carried out using an abrasive slurry (RDA = 121) for 25 min. Profiles were recorded using a contact profilometer. Mean and standard deviation were calculated for the abrasive dentine wear in each group. Two-way ANOVA was used to locate any significance. The significance values were corrected after Tukey (α = 0.05). RESULTS: Brushing with tapered-end bristles resulted in statistically significantly less abrasive dentine wear than round-end bristles regardless of the applied brushing force (1 N: 4.4 ± 1.5 vs. 7.7 ± 2.0 µm; 2 N: 7.7 ± 2.1 vs. 12.2 ± 2.7 µm; 3 N: 11.3 ± 2.6 vs. 19.4 ± 3.7 µm; 4 N: 11.2 ± 2.1 vs. 25.3 ± 4.8 µm). The interaction between bristle configuration and brushing force was statistically significantly (p < 0.001). CONCLUSION: Tapered-end toothbrushes might be a safer choice for patients, especially when showing signs of non-carious cervical lesion. However, other toothbrush properties should also be considered.

Effect of the toothbrush tuft arrangement and bristle stiffness on the abrasive dentin wear.

The geometrical properties of toothbrushes play a role in developing abrasive tooth wear and non-carious cervical lesions. This study investigated the interplay between the toothbrush tuft arrangement (crossed vs. parallel) and bristle stiffness (soft vs. medium) on the abrasive dentin wear using three slurries with different levels of abrasivity (RDA: 67, 121 and 174). Twelve groups of bovine dentin samples (n = 20) were brushed with a combination of the aforementioned variables. Abrasive dentin wear was recorded with a profilometer and the resulting abrasive wear of each group was calculated and compared with each other using two-way ANOVA and pairwise tests. Toothbrushes with parallel tuft arrangement caused statistically significantly higher dentin wear compared to crossed tuft arrangement, regardless of the abrasivity level of the used slurry and the bristle stiffness. Soft crossed tuft toothbrushes caused statistically significantly higher abrasive dentin wear than medium crossed tuft toothbrushes, while soft and medium parallel tuft toothbrushes caused the same amounts of dentin wear, regardless of the RDA value of the used slurry. These results could be helpful for dentists and dental hygienists when advising patients. Crossed tuft toothbrushes could be a less-abrasive choice in comparison to parallel tuft toothbrushes.

Enamel Softening Can Be Reduced by Rinsing with a Fluoride Mouthwash Before Dental Erosion but Not with a Calcium Solution.

PURPOSE: This in-situ-study investigated if rinsing the oral cavity with a calcium containing solution or a fluoride containing mouthwash immediately before an erosive attack leads to reduced enamel softening. MATERIALS AND METHODS: Bovine enamel samples (n = 240) with measured baseline surface microhardness (KHN) were assigned to five series (S1-5). Twelve participants carried out each series as follows: Four enamel samples of the associated test series were placed in an intraoral appliance and carried in each participants' mouth. After 30 min, the participants either rinsed the oral cavity for 60 s with 30 ml of a solution prepared from a 1,000 mg calcium effervescent tablet dissolved in 100 ml water (S2), an 800 mg calcium containing mineral supplement powder (5 g) dissolved in 200 ml water (S3), a fluoride (500 ppm) mouthwash (S4), a fluoride (500 ppm) and stannous chloride (800 ppm) containing mouthwash (S5), or did not rinse with any test solution before the erosive attack (S1, negative control). The participants subsequently rinsed the oral cavity with 100 ml of a soft drink (Sprite Zero) for 60 s to simulate the erosive attack and immediately afterwards with water to stop the erosive process. As final step, surface microhardness was measured a second time and hardness loss (∆KHN) calculated. Differences of ∆KHN between the series were investigated by fitting a mixed effect model to the data set. RESULTS: The highest loss of microhardness and thus softening of enamel (mean of ∆KHN; lower/upper confidence level) was observed in the negative control (S1: 60.2; 67.6/52.8). While no statistically significant difference (P > 0.05) compared to S1 could be found in S2 (50.0; 57.4/42.5) and S3 (54.6; 62.1/47.2), statistically significantly less softening of enamel (P < 0.001) was discovered in S5 (33.8; 41.2/26.4) and S4 (41.8.2; 49.3/34.4). S5 showed the overall lowest values for ∆KHN and thus best protection from enamel softening. CONCLUSION: Rinsing with a fluoride mouthwash or a fluoride and stannous chloride containing mouthwash immediately before an erosive attack reduces the softening of enamel. None of the investigated calcium-containing solutions was able to reduce erosion induced softening of enamel.